Interphase Tech iSPAN User Manual download pdf (Page 103)

Chapter 5: Setting Up the NDIS Driver

iSPAN Serial WAN Adapter Users Guide 83

Next, if you want to set up PPP port properties, skip to Setting

Up Port Properties on page 86.

X.25 WAN Properties

The X.25 Properties dialog box enables you set up WAN

properties for a channel that uses the X.25 protocol. Use this

dialog box to define the properties of outgoing calls and

choose how to filter incoming calls.

Figure 5-13. X.25 Properties

For detailed information about setting up protocol parameters

using this dialog box, see online help.

To set up X.25 WAN properties for the channel, do the

following:

1. In the Outgoing call section, set up properties for

outgoing calls as follows:

a. In the Remote address field, to route the outgoing

call to the remote peer, enter the address of the

remote peer. You can add a one or two-digit sub-

address to connect to a specific workstation or

application on a LAN.

b. In the Local sub-address field, if you want the

network to provide the local sub-address to the

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 235 236

No comments

Interphase Tech iSPAN User Manual Page 103