Interphase Tech iSPAN User Manual download pdf (Page 108)

Setting Up Channels for Logical Adapters

88 Interphase Corporation

b. Specify the clock, coding, and DSR Timer

properties for the serial line.

c. Click OK to save the serial line properties and return

to the Channel properties dialog box.

X.25 Port Properties

The following illustration shows the Port section of the

Channel properties dialog box when the X.25 WAN protocol

is selected.

Figure 5-17. X.25 Channel Port Properties

To set up port properties for a channel using the X.25 protocol,

do the following:

1. In the Card field, if more than one physical iSPAN-

Serial WAN adapter is installed, select the physical

adapter to be used by the channel.

2. In the Network field, if more than one X.25 network

configuration has been created for use by the NDIS

driver, select the network configuration to be used by

this channel.

3. If you need to create, edit, or remove a network

configuration to be used for driver connections, do the

following:

a. Click the Properties button in the Port section of the

Channel properties dialog box.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 235 236

No comments

Interphase Tech iSPAN User Manual Page 108